Classic Car Touch-Up Paint
For a small chip or scratch on a classic car, start with the colour reference and the condition of the existing finish. A familiar colour name, model year or registration may help identify the car, but it does not confirm the paint currently on a restored or repainted panel.
Ask our paint team about your classic or browse the listed colour references. If your reference is not listed, ask us to check availability before placing an order.
Find the reference for the paint on your car
Look for the original paint information in the vehicle records, a manufacturer's label or a previous restoration invoice. On a car that has been resprayed, the paint supplier's reference or restorer's mixing record may be more useful than the original factory colour.
Copy the complete reference, keeping letters, numbers and any suffix. Different shades can share a familiar name such as British Racing Green. A screen photograph is useful for showing the car and the damage, but cannot establish an exact paint formula.
What to send with a classic-car paint enquiry
- The make, model and approximate year of manufacture.
- The full paint code and colour name, with a clear label or invoice photograph where available.
- The part being repaired, including any contrasting roof, wheel or trim finish.
- Any known repaint history and the existing coating type, if recorded.
- A photograph of the whole panel and a close-up of the chip or scratch.
Include a previous Touchuppaint order or batch reference when reordering. These details help us check the available colour record and suitable product format; they do not replace a dry colour test.
Already have a manufacturer colour reference?
The current Austin Rover range includes recorded older references such as Old English White WT3. View the listed Old English White WT3 brush-paint product or browse Austin Rover references. Confirm your own code and coating requirements; a familiar colour name is not enough to establish suitability.
Use these existing libraries to check the references currently listed. Confirm the full code rather than choosing a similar-looking shade or assuming a modern model listing applies to your classic.
Choose a format for a small repair
A brush bottle or fine-tip applicator gives controlled application into a small area of missing paint. An aerosol is a different job: it needs suitable preparation, masking and the full coating system over a wider area.
Compare the actual paint packs and contents. Primer, colour and finishing products are separate stages where the selected system requires them; a kit name alone does not confirm everything your repair needs.
Test the colour and the existing finish
Years of sunlight, polishing and previous repairs can change a panel's appearance. Apply the specified coating system to a separate test piece, let it dry and compare it beside the clean car in daylight. A factory reference is a starting point, not a measurement of an aged panel.
Older, unknown, cracked or lifting coatings need a compatibility assessment before adding new paint. Tell the paint team what you know about the existing finish. Do not assume that one modern product is suitable over every historic coating.
For isolated damage, read our stone-chip guide. For extensive crazing, corrosion or a restoration requiring an even full-panel finish, discuss professional refinishing before choosing a local touch-up.
Updated 17 November 2026. Follow the instructions supplied with your selected paint system.