Mercedes-Benz Paint Codes: Find Your Colour

Find the complete Mercedes-Benz paint reference before ordering a touch-up colour. A model badge or a name such as black, silver or white is not enough to identify the finish on its own. Check the colour record, the part being repaired and any previous paintwork together.

Browse Mercedes-Benz touch-up paint · Get help with a paint reference

Start with the vehicle-identification information

Open the owner's manual for your exact model and year, then look for the vehicle-identification or technical-data section. Mercedes-Benz provides online manuals and PDF downloads through its official UK owner-information page. Use the handbook belonging to your vehicle when a general diagram and the physical label do not agree.

As an archived example, the official 2007 C-Class manual shows a paint-code-number field on its door-frame identification plate. That publication describes a particular market and vehicle generation; it should not be used to assign the same label side or layout to every UK Mercedes-Benz. The useful check is to identify the paint field in your own vehicle's documentation.

Keep the paint code separate from the VIN

The vehicle identification number identifies the car. A paint reference identifies a factory colour, and the two may appear on the same plate without being interchangeable. Vehicle weights, type information and interior specifications can also be present.

Photograph the whole label and the colour field before copying a reference. Keep leading zeros, letters and any suffix shown. Do not remove a prefix simply because an online listing uses a shorter version; send both references to our team if you are unsure whether they describe the same colour.

What to do if the reference is missing

Ask a Mercedes-Benz retailer to help confirm the original colour from the vehicle details. Use an official contact route for any VIN or ownership information requested. A factory record is useful for an original finish, but it cannot prove that a door, bumper or the whole car has never been repainted.

Tell us about repair history, a contrasting part or a specialist finish before ordering. Body paint, wheels and trim may need different references. Matt, satin and special-effect finishes need particular care because colour and surface appearance both affect the result.

Choose the product for the size of the repair

Once the colour is established, browse the Mercedes-Benz range or use our registration ordering page. Registration identifies the vehicle; our team checks the paint details afterwards. Supply a known code and colour name wherever possible.

For a small isolated chip, compare brush and fine-tip application. For a suitable wider spray repair, check the preparation and full coating sequence before choosing an aerosol. Standard car-colour aerosols are basecoat and require compatible clear lacquer; standard fine-tip paint is direct gloss. The selected product's instructions take priority for its actual system.

Check a separate dried test first

Make a separate test with the required preparation, colour and finishing products. Let it dry as directed, then compare beside the cleaned panel in daylight from different angles. A thick paint deposit or a brush-applied effect finish may look different from the original sprayed panel.

Pause if the test is wrong. Send the reference and test photographs through photo help before applying paint to the vehicle. Paint does not repair dents, cracked plastic or a failing coating. Our pack comparison, C-Class page and repair guides can help with the next choice.

Official information and further reading

Reviewed 17 November 2026. Use the handbook supplied for your vehicle and follow the directions for each paint product.

Updated 17 November 2026. Check the instructions supplied with your paint and the handbook for your exact vehicle.

Loading...