Painted Wing-Mirror Scratch Repair
A scrape on a wing mirror can affect the painted cover, textured plastic, indicator lens or glass. Start by identifying the damaged part. Colour-matched paint is an option for suitable paint loss on a sound painted cover; it cannot repair broken plastic, a loose housing or damaged glass.
View brush-bottle paint, compare a fine-tip applicator or send photographs for product advice.
Is the cover painted or unpainted?
A smooth body-coloured or contrasting coloured cap usually has a coating to assess. A moulded grain in black plastic may be an unpainted finish, where body-colour paint and polishing could change the texture. Check the part specification if you are unsure.
Clean the cover gently and inspect it dry. A streak of another colour may be material transferred onto the finish. A light scratch in intact gloss lacquer is different from a chip where colour is missing. Avoid sanding before you know which problem you have.
Confirm the mirror colour separately
Some mirror caps match the body; others use a contrasting black, silver or special finish. The car's body-paint code should not automatically be used for a contrasting cap. A replacement or previously refinished mirror may also differ from the original specification.
Supply the full colour reference where known and say that the repair is on a mirror cover. Include the make, model, year and any previous repair information. Use our paint-code help or ask our team before ordering if the cap reference is unclear. A photograph helps show the part and damage, but cannot confirm an exact formula.
Choose controlled touch-up or a wider spray repair
- A small isolated chip: a fine-tip applicator or small brush can keep colour within the missing-paint area.
- A narrow scrape: a local brush repair may improve its appearance if a visible close-up repair is acceptable.
- A broad scuff or damaged clear coat: assess the preparation and finishing area before choosing an aerosol. Spraying needs more space and masking than the visible mark suggests.
- A crack, deep gouge or loose cap: repair or replace the part before considering the coating.
Compare the actual pack contents. A general primer is not automatically suitable for exposed mirror-cap plastic; check substrate compatibility with the selected coating system.
Plan the repair before opening the paint
- Work on a clean, dry cover and record the original damage.
- Test the colour and specified finishing stages on a separate piece. Let it dry and compare beside the cover in daylight.
- Prepare only the damaged area as the products require. Leave sound surrounding paint intact where possible.
- Apply small, thin amounts for a local touch-up, following the supplied recoat times.
- Complete any specified lacquer stage and allow the coating to cure before cleaning or refinement.
Standard car-colour aerosols are basecoat and need compatible clear lacquer. Keep coating away from glass, lenses, seals and moving or electrical parts. If removing a cap is necessary, follow the vehicle's repair instructions rather than forcing its clips.
Need help judging the job?
The painted-plastic bumper guide explains the distinction between paint loss, transfer and exposed plastic. Send a whole-mirror photograph, a close-up and the colour information through photo help if you need advice before selecting a pack.
Updated 17 November 2026. Follow the instructions supplied with your selected paint system.