MG touch up paint: paint references, repair choices and colour tests

MG touch up paint

For a small chip or scratch on your MG, first establish the paint reference and the type of damage. Touchuppaint supplies independently mixed paint referenced to vehicle colours. Our products are our own paint, and the vehicle name identifies the colour application.

Check the reference on your MG

Start with the handbook for the model and year, then record the paint reference exactly as supplied. The MG name covers vehicles from different periods, so a label location or a code used for one car should not be applied automatically to another.

Tell us if a classic car has been restored, if a panel has been replaced, or if the current finish differs from its original specification. An original factory reference helps identify a recorded colour, but it cannot establish an undocumented respray. Send the replacement paint details when available.

Find the relevant MG owner manual.

Ordering by registration, code or vehicle details

Our vehicle colour lookup gives you a starting point. A registration identifies vehicle information; it does not itself confirm an exact factory paint code. If you already know the code, include it. Make, model and year help narrow the recorded options, but several colours may have been offered.

Choose a format for the damage

  • Bottle: brush-in-lid application for individual chips and small areas of missing colour.
  • Fine-tip applicator: controlled application to small marks. Check the product details and supplied instructions.
  • 400ml colour aerosol: a spray option for suitable wider cosmetic repairs. Our standard colour-matched car aerosol is basecoat and requires compatible clear lacquer.

Primer, lacquer and finishing compound are included only in the packs that name them. Compound does not add a lacquer product to a bottle or pen pack. Compare the nine paint options and their contents.

Test before touching the vehicle

Follow the supplied instructions and make a separate test using the required coating system. Allow it to dry as directed, then compare it beside the panel in daylight. A screen swatch is an approximate guide; it cannot prove a physical match. Metallic and pearlescent finishes can also look different with application and viewing angle.

If the test looks wrong, stop and keep the container label. Send the order number, paint reference and photographs of the dried test beside the panel to our paint team before continuing.

Prepare and finish using the product instructions

Check the condition of the surface and whether a compatible primer is required. Paint cannot repair weakened material, heavy corrosion or failing clear coat. Ask before ordering for matt, satin, three-stage or unknown existing finishes.

Drying, recoating and curing depend on the actual products and conditions. Use their supplied directions rather than a general time from another paint system. Read our primer and lacquer guide and colour-test guide before starting.

Leave a Reply

Your email address will not be published. Required fields are marked *