Volvo touch up paint: finding your colour and choosing a pack

Volvo Touch Up Paint

For a small chip or scratch on your Volvo, first establish the paint reference and the type of damage. Touchuppaint supplies independently mixed paint referenced to vehicle colours. Our products are our own paint, and the vehicle name identifies the colour application.

Finding the Volvo paint label

Check the instructions for your specific model and year. For the 2025 V60, Volvo places the body paint code on a label low on the pillar between the front and rear doors, visible when the right-hand rear door is opened. This is a model-specific example, rather than a location rule for every Volvo.

If your car has a matt finish, ask for specialist advice before ordering a conventional gloss repair product. Volvo recommends an authorised workshop for paint repairs on vehicles with matt clear coat.

Volvo V60 paint-code guidance · Volvo advice on paint damage and matt finishes.

Ordering by registration, code or vehicle details

Our vehicle colour lookup gives you a starting point. A registration identifies vehicle information; it does not itself confirm an exact factory paint code. If you already know the code, include it. Make, model and year help narrow the recorded options, but several colours may have been offered.

Choose a format for the damage

  • Bottle: brush-in-lid application for individual chips and small areas of missing colour.
  • Fine-tip applicator: controlled application to small marks. Check the product details and supplied instructions.
  • 400ml colour aerosol: a spray option for suitable wider cosmetic repairs. Our standard colour-matched car aerosol is basecoat and requires compatible clear lacquer.

Primer, lacquer and finishing compound are included only in the packs that name them. Compound does not add a lacquer product to a bottle or pen pack. Compare the nine paint options and their contents.

Test before touching the vehicle

Follow the supplied instructions and make a separate test using the required coating system. Allow it to dry as directed, then compare it beside the panel in daylight. A screen swatch is an approximate guide; it cannot prove a physical match. Metallic and pearlescent finishes can also look different with application and viewing angle.

If the test looks wrong, stop and keep the container label. Send the order number, paint reference and photographs of the dried test beside the panel to our paint team before continuing.

Prepare and finish using the product instructions

Check the condition of the surface and whether a compatible primer is required. Paint cannot repair weakened material, heavy corrosion or failing clear coat. Ask before ordering for matt, satin, three-stage or unknown existing finishes.

Drying, recoating and curing depend on the actual products and conditions. Use their supplied directions rather than a general time from another paint system. Read our primer and lacquer guide and colour-test guide before starting.

Leave a Reply

Your email address will not be published. Required fields are marked *